AMT Pump # 2760-99 - Cast Iron Pedestal Pump

The AMT Pump # 2760-99 is an AMT Pedestal pump end only, less motor # 2760-99 - Cast Iron Pedestal Pedestal pump end only, less motor, with Cast Iron construction, Buna shaft seal, 2 inch Inlet port, 2 inch Discharge port, bare shafted Pedestal pump end only on a bearing Pedestal without a motor. This pedestal, self-priming, up to 20 foot lift, centrifugal pump is a heavy-duty unit designed for the high volume liquid transfer involving irrigation, dewatering, lawn sprinkling, etc. This pump is equipped with a flapper valve to eliminate re-priming after each use, and a clog-resistant impeller which enables the pumps to handle semi-solids up to 3/8 inch diameter, and sediment laden liquids. It can handle liquids from 40 degrees F to 180 degrees F (4 degrees C to 82 degrees C). ONLY for use with non-flammable, nonabrasive liquids compatible with pump component materials. This pedestal pump can be installed with a direct-coupling drive or pulley drive and can be driven by electric motor or gasoline engine. The maximum recommended RPM is 4,000 rpm.
WEIGHT : The AMT 2760-99 weighs 48 Lbs.