NOTE : This is a 230 Volt AC, Single Phase Pump. For other AC votages please inquire - This is NOT available in 115 Volt (for 115 Volt AC version use the Minex-Lite pump)

The Minex pump is the smallest model in the drainage range, but it shares all important features and benefits with the larger models, resulting in the lowest cost per cubic meter pumped. The drainage range of pumps drain water, not your wallet! The revolutionary hydraulic design ensures high wear resistence and dramatically reduces performance drop due to long time wear. Maximum solids pump can pass are 0.3 inches (1/3 of an inch).

Materials :
• Casted parts: Aluminium
• Outer casing: Stainless steel
• Motor shaft: Stainless steel
• Impeller: Hard-Iron
• Diffusers: Nitrile rubber
• O-rings: Nitrile rubber
• Screws and nuts: Stainless steel

Features:
• Discharge connection is 2 inch hose, as well as 2 inch NPT or ISO-G threads
• Rated current at 230 Volts, 1 Phase, is 8.2 Amps
• Shaft seals :
-Cartridge seal: pre-assembled double mechnical seal running in an oil compartment
- Material lower seal: silicon carbide - silicon carbide
- Material upper seal: tungsten carbide - aluminium oxide

Limitations :
• Max. submersion depth: 20 m (66 ft)
• Max. liquid temperature: 40 degrees C (104 degrees F)
• Allowed pH range: 5 - 8
• Maximum solids pump can pass are 0.3 inches (1/3 of an inch)

Pump Dimensions :

Performance Curve :