Moyno # 33359 Pump and Motor - 1/2 HP 115/230 Volts Cast Iron body

Moyno # 33359

Moyno catalog # 33359, Progressing Cavity Pump and Motor Unit. Close Coupled to a 1/2 Horsepower, 115 /230 Volts, 1 Phase Motor. Fitted with : Cast Iron Body, 416 Stainless Steel Rotor, Buna Stator, Buna Mechanical Seal. 3/4 Inch NPT Suction Port x 3/4 Inch NPT Discharge port

Product Information :

Parts and Accessories for Moyno model 33359

Applications

Moyno 500 Series 300 Motor Pumps offer economical, highefficiency performance with application versatility and maintenance simplicity.

Construction of Pump • Body/Housing Cast iron • Rotor Chrome plated 416 stainless steel • Stator Buna 10160F Temperature Range • Seal Buna Mechanical Seal carbon/ceramic • Motor 1/2 HP, 60 Hertz, 1725 rpm, totally enclosed, fan cooled TEFC CFaced, 1 phase 115/230V • Motor Shaft 416 stainless steel • Ports are 3/4 Inch NPT Suction Port x 3/4 Inch NPT Discharge port

Features • Combine high performance with compact size • Provide accurate, repeatable, nonpulsating, lowshear flow • Design simplicity reduces maintenance • No valves to stick or wear out and no timing gears to align • Handle clean water to viscous, abrasive fluids or solidsladen fluids • Selfpriming With wetted pumping elements, the pump is capable of 25 feet of suction lift with pipe size equal to port size. Be sure suction lines are air tight or pump will not self prime. Selfpriming capabilities will vary due to fluid viscosity.

IMPORTANT To prevent damage to pump, pump rotation must be clockwise when facing pump from motor end. DO NOT RUN DRY. Unit depends on liquid pumped for lubrication. NOTE Maximum shaft speed is 1750 rpm.